FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls Self-Diagnostics › Diagnostic Tests › DTC P1336: Crankshaft System Variation Not Learned › Diagnostic Procedures

Diagnostic Procedures

  1. Did you perform the Diagnostic System Check - Engine Controls? If yes, go to next step. If no, see DIAGNOSTIC SYSTEM CHECK - ENGINE CONTROLS  under SELF-DIAGNOSTIC SYSTEM.
  2. Perform the crankshaft position system variation learn procedure. See CRANKSHAFT POSITION SENSOR  under PROGRAMMING. When complete, go to next step. If crankshaft position system variation learn procedure cannot be performed, see DIAGNOSTIC AIDS .
  3. Clear the DTCs with a scan tool. Turn ignition off. Start engine. Operate vehicle within the Conditions for Running DTC. See CONDITIONS FOR RUNNING DTC . Does the DTC run and pass? If yes, go to next step. If no, go to step  2.
  4. Observe the stored information, Capture Info with a scan tool. Does the scan tool display any DTCs that you have not diagnosed? If yes, see DIAGNOSTIC TROUBLE CODE DEFINITIONS . If no, system is okay.
About FixVault