Zone 2
WARNING: This page is about a different car, the 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition off and remove key. Remove SIR fuse (10-amp) from fuse block, located in junction block in center console. See Figure.
- Remove driver-side lower B-pillar trim panel. Remove Side Impact Sensor (SIS) from lower B-pillar. See SIDE IMPACT SENSOR (SIS) under REMOVAL & INSTALLATION. Remove Connector Position Assurance (CPA) clip from Side Impact Sensor (SIS) connector. Disconnect SIS connector.