FixVault

Zone 3

WARNING: This page is about a different car, the 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition off and remove key. Remove SIR fuse (10-amp) from fuse block, located in junction block in center console. See Figure.
  2. Remove driver-side insulator panel. Remove Connector Position Assurance (CPA) clip from driver-side air bag module connector. Disconnect driver-side air bag module connector.
Fig 1: Identifying Driver-side Air Bag Module Connector
G99C23798Courtesy of GENERAL MOTORS CORP.