FixVault

Zone 7

WARNING: This page is about a different car, the 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition off and remove key. Remove SIR fuse (10-amp) from fuse block, located in junction block in center console. See Figure.
  2. Remove Connector Position Assurance (CPA) clip from driver side impact air bag module connector. See Fig 1. Disconnect driver side impact air bag module connector.
Fig 1: Identifying Side Impact Air Bag Module Connector (Driver-side Shown; Passenger-side Is Similar)
G99B23797Courtesy of GENERAL MOTORS CORP.