FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 364 (Power Seat System) › Repair Instructions › Seat Replacement - Split Bench › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the front seat into the vehicle.
  2. Tip the front seat forward to engage the front hook attachments.
  3. Connect the front seat electrical connectors.
    NOTE: Refer to FASTENER NOTICE .
  4. Install the front seat adjuster to floor pan bolts. Tighten the bolts to 42 N.m (31 lb ft).
    5. Fig 1: Identifying Front Seat Adjuster-To-Floor Pan Bolts
    G01756037Courtesy of GENERAL MOTORS CORP.
  5. Reposition the front seat to the full back position.
  6. Install the front seat track adjuster covers. Refer to Seat Adjuster Track Cover Replacement - Front .
  7. Install the seat belt anchor plate nut. Tighten the nut to 42 N.m (31 lb ft).
    8. Fig 2: Identifying Seat Belt Anchor Plate Nut
    G01756038Courtesy of GENERAL MOTORS CORP.
  8. Install the head restraint. Refer to Head Restraint Replacement - Front Seat .
  9. Enable the SIR system if seat is equipped with air bag. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
About FixVault