FixVault

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the battery.
  2. Install the battery hold down retainer.
  3. Install the battery hold down retainer nut.

    Tighten 

    Tighten the battery hold down retainer nut to 17 N.m (13 lb ft).

  4. Connect the positive battery cable.

    Tighten 

    Tighten the positive battery cable bolt to 15 N.m (11 lb ft).

  5. Connect the negative battery cable. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE  .
    Fig 1: Installing battery
    G01978301Courtesy of GENERAL MOTORS CORP.