FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 448 (Horn System) › Repair Instructions › Horn Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Horn
    GM624136Courtesy of GENERAL MOTORS CORP.
  1. Position the horn to the front bumper impact bar; position the horn anti-rotation tab onto the tab on the front bumper impact bar.
    2. Fig 2: Identifying Horn Bracket Bolt
    GM629246Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the horn bracket bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    3. Fig 3: Locating Horn Electrical Connector
    GM624142Courtesy of GENERAL MOTORS CORP.
  3. Connect the horn electrical connector.
  4. Install the right and/or left headlamp. Refer to Headlamp Assembly or Headlamp Bulb Replacement (Aztek) or Headlamp Assembly or Headlamp Bulb Replacement (Rendezvous) in Lighting Systems.
About FixVault