Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connectors to the roof side rail lamp.
- Install the lamp to the roof.
- Install the screws to the lamp.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the cover to the lamp.
- Install the cover of the coat hook access hole on the lamp.
NOTE:
Refer to Fastener Notice in Cautions and Notices.