Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front seat back cover with alignment mark to the alignment mark on the pad.
- Install the hog rings to the front seat back cover to the pad.
- Install the seat back cover over the pad while alining the hook and the loop retainers.
- Install the hook and the loop retainers, securing the front seat back cover to the pad.
- Install the seat back cover to the front retainer at the side impact airbag.
- Install the seat back cover to the rear retainer at the side impact airbag.
- Install the side air bag to the front right and/or left seat.
- For the right front seat side air bag, refer to Inflatable Restraint Side Impact Module Replacement - RH in Seats.
- For the left front seat side air bag, refer to Inflatable Restraint Side Impact Module Replacement - LH in Seats.
- Install and adjust the seat back cover to the side air bag retainer, by pressing in and pulling down on the seat back cover.
- Reposition the front seat back cover end flap.
- Install the J-hook retainer at the bottom of the seat back cover.
- Install the front seat back to the front seat. Refer to Seat Back Replacement - Front .
- Install the front seat headrest. Refer to Head Restraint Replacement - Front Seat .
- Install the front seat armrest. Refer to Armrest Replacement - Front Seat .
- Install the front bucket seat. Refer to Seat Replacement - Bucket .