FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 470 (Seat System) › Repair Instructions › Seat Switch Replacement - Power › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the outer trim panel from the front seat cushion. Refer to Seat Cushion Outer Trim Panel Replacement - Front Seat .
    2. Fig 1: Identifying Power Seat Switch Retainers
    GM626986Courtesy of GENERAL MOTORS CORP.
  2. Use a small flat-bladed tool to release the retainers which hold the power seat switch to the outer trim panel.
    3. Fig 2: Locating Power Seat Switch
    GM627002Courtesy of GENERAL MOTORS CORP.
  3. Remove the power seat switch from the outer trim panel.
    4. Fig 3: View Of Power Seat Switch Harness
    GM627240Courtesy of GENERAL MOTORS CORP.
  4. Remove the power seat switch harness from the front seat support.
    5. Fig 4: Locating Power Seat Switch Electrical Connector
    GM627008Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the power seat switch.
  6. Remove the power seat switch.
About FixVault