FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 480 (Wiper System & Washer System) › Repair Instructions › Washer Solvent Container Level Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Washer Solvent Container Level Sensor & Seal
    GM735845Courtesy of GENERAL MOTORS CORP.
  1. Position the washer solvent container level sensor and seal to the washer solvent container pressing in until fully seated.
    2. Fig 2: View Of Washer Solvent Container Level Sensor Electrical Connector
    GM774666Courtesy of GENERAL MOTORS CORP.
  2. Connect the washer solvent container level sensor electrical connector.
  3. Fill the washer solvent container with washer solvent.
  4. Close the hood.
About FixVault