Pressure Regulator: Installation
WARNING: This page is about a different car, the 2002 GMC Sonoma, 2002 GMC Jimmy, 2002 Chevrolet S10 Pickup, and 2002 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the pressure regulator valve (1). Install the pressure regulator isolator spring (3) and the pressure regulator valve spring (2). See Fig 2.
- Install the reverse boost valve (4) in the reverse boost valve sleeve (5). Install the reverse boost valve (4) and sleeve (5) in the oil pump cover. See Fig 2.
- Compress the reverse boost valve sleeve into the bore of the oil pump to expose the retaining ring slot.
- Install the reverse boost valve retaining ring, then slowly release tension on the reverse boost valve sleeve. See Fig 1. Install the transmission oil filter and pan. See DRAINING & REFILLING under LUBRICATION.
- Lower the vehicle. Fill transmission with appropriate fluid to proper level. See LUBRICATION .