Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Position the carpet to the intermediate body panel.
- Tuck the carpet under the adjoining panels and over the floor carpet.
- Install the stowage lid bracket.
- Install the stowage lid extension panel with the manual release cable extending out from under the extension panel. Refer to Compartment Lid Extension - Folding Top Stowage .
- Close the stowage lid and check the operation of the latch.
CAUTION:
In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.