FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › External Pages › Different car › Section 659 (Seat System) › Repair Instructions › Seat Switch Replacement - Power › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Back Recliner Handle
    GM71223Courtesy of GENERAL MOTORS CORP.
  1. Remove the seat back recliner handle.
    1. With a suitable blunt ended tool inserted between the cushion and the handle push the handle retaining spring clip down.
    2. Pull the handle from the shaft.
    2. Fig 2: Switch To Side Trim Panel & Screws
    GM281995Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws attaching the seat side trim panel.
    3. Fig 3: Panel Side To Seat Frame
    GM333451Courtesy of GENERAL MOTORS CORP.
  3. Rock the panel side to side working the barrel post clip (1) out of the seat frame.
  4. Reposition panel away from the seat.
    5. Fig 4: Side Trim Panel & Switch Harness
    GM71221Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the switch harness.
  6. Remove the switch.
About FixVault