FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Accessory Fill Valve Replacement › Installation Procedure

Installation Procedure

  1. Install the accessory fill valve into the trim panel.
  2. Install the washer (4) and the nut (3) to the accessory fill valve.

    Tighten 

    Tighten the accessory fill valve nut to 6 N.m (53 Ib in).

  3. Install the cap to the accessory fill valve.
  4. Install the hose (1) onto the accessory fill valve (5).
  5. Install the lower rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT -- REAR QUARTER LOWER (AZTEK) or TRIM PANEL REPLACEMENT -- REAR QUARTER LOWER (RENDEZVOUS) .
  6. Install the accessory fill valve access cover.
    Fig 1: Installing Different Part Of Accessory Fill Valve
    G01499765Courtesy of GENERAL MOTORS CORP.
About FixVault