FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Air Compressor Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the ALC shield (2) onto the vehicle.
    Fig 1: Installing ALC Shield Onto Vehicle
    G01499752Courtesy of GENERAL MOTORS CORP.
  2. Install the ALC shield bolt (1) and retainers to the vehicle.

    Tighten 

    Tighten the bolts to 6 N.m(53 in Ib).

  3. Install the ALC compressor assembly onto the vehicle. Refer to AIR COMPRESSOR REPLACEMENT 
  4. Lower the vehicle.
    Fig 2: Installing ALC Shield Bolt And Retainers To Vehicle
    G01499753Courtesy of GENERAL MOTORS CORP.
About FixVault