FixVault
Home › Pontiac › 2003 › Aztek AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Inflator Air Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the inflator fill valve access cover.
  2. Remove the lower rear quarter trim panel. Refer to TRIM PANEL REPLACEMENT -- REAR QUARTER LOWER (AZTEK) or TRIM PANEL REPLACEMENT -- REAR QUARTER LOWER (RENDEZVOUS) .
  3. Remove the switch from the inflator control panel.
  4. Disconnect the electrical connector (1) from the accessory inflator switch (2).
    Fig 1: Disconnecting Electrical Connector From Accessory Inflator Switch
    G01499724Courtesy of GENERAL MOTORS CORP.
About FixVault