FixVault
Home › Pontiac › 2003 › Aztek FWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Data Link Communications System › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

  1. Place the data link connector into position.
  2. Install the bolts/screws to the data link connector.

    Tighten 

    Tighten the bolts/screws to 2 N.m (18 lb in).

    Fig 1: Installing Bolts/Screws To Data Link Connector
    G01515273Courtesy of GENERAL MOTORS CORP.
About FixVault