Installation Procedure

Important:  Ensure that the information logo stencil on the sunroof window panel is at the rear of the opening.

1. Position the sunroof window panel into the sunroof module.
   Fig 1: Positioning Sunroof Window Panel Into Sunroof Module

   Courtesy of GENERAL MOTORS CORP.
2. Install the sunroof window panel screws to the sunroof module.

   Tighten 

   Tighten the sunroof window panel screws to 4 N.m (35 lb in).

3. Adjust the sunroof window panel as necessary. Refer to SUNROOF WINDOW HEIGHT AND OPENING FIT ADJUSTMENT  .
4. Inspect the sunroof window panel for proper operation.
5. Close the sunshade.
   Fig 2: Installing Sunroof Window Panel Screws To Sunroof Module

   Courtesy of GENERAL MOTORS CORP.