FixVault
Home › Pontiac › 2003 › Grand Prix GTP › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Heated Seat Control Module Replacement - Front › Removal Procedure

Removal Procedure

  1. Remove the seat cushion trim cover and pad to expose the heater control module (3). Refer to SEAT CUSHION COVER REPLACEMENT - FRONT  .
  2. To remove the module from the seat inboard frame, pinch the retaining pin together and pull the module out.
    Fig 1: Locating Heated Seat Control Module
    G01504412Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the module from the electrical connector.
  4. Remove the module from the vehicle.
    Fig 2: Disconnecting Module From Electrical Connector
    G01504413Courtesy of GENERAL MOTORS CORP.
About FixVault