Preliminary Setup
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Turn the ignition switch to the OFF position.
- Connect the J 29532 according to the manufacturer's instructions.
- Turn the ignition switch to the ON position, engine OFF.
- Connect a scan tool and establish communication with the ABS system.
- Pressurize the bleeding tool to 35 psi.