Cruise Control Brake Switch & Brake Switch

WARNING: This page is about a different car, the 2002 Pontiac Sunfire, 2002 Chevrolet Cavalier, 2001 Pontiac Sunfire, and 2001 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Brake booster pushrod must be assembled to brake pedal before cruise control brake switch and brake switch can be adjusted.

With brake pedal released, switch plunger should be fully depressed against pedal shank. To adjust, depress pedal and push switch until switch body is fully seated on retainer. Pull pedal towards rear of vehicle, against pedal stop (until clicking sound cannot be heard while pulling pedal). Switch will adjust to proper position in retainer. Check brakelights for proper operation.