Installation Procedure
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the following components to the strut:
- 1.1. The lower insulator (9)
- 1.2. The spring bumper (7)
- 1.3. The coil spring (10)
- 1.4. The upper insulator (6)
- 1.5. The spring seat (5)
- 1.6. The dust seal (4)
- 1.7. The strut support (3)
- Mount the strut assembly into the J 34013-B using the J 34013-88 .
- Compress the coil spring (10).
- Install the strut rod piston nut and hold the strut rod, at the top, from turning. Tighten the strut rod piston nut (2) to 47 N.m (34 ft lbs).
- Install the dust cap (1).
- Release the compressed coil spring (10).
- Remove the strut from the J 34013-B .
- Install the strut assembly.