FixVault
Home › Pontiac › 2003 › Sunfire Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Automatic Transmission Servicing) › Removal & Installation › Vehicle Speed Sensor › Installation

Vehicle Speed Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Clean and dry the vehicle speed sensor.
  2. Install the vehicle speed sensor and the retaining stud. See Figure. Tighten the stud to specification. See TORQUE SPECIFICATIONS .
  3. Install the electrical connector at the sensor.
  4. Lower the vehicle.
  5. Connect the negative battery cable.
About FixVault