FixVault
Home › Pontiac › 2003 › Vibe Base, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent System › Repair Instructions › Theft Deterrent Control Module Replacement › Removal Procedure

Removal Procedure

  1. Remove the instrument panel compartment door. Refer to COMPARTMENT REPLACEMENT - INSTRUMENT PANEL (I/P) in Instrument Panel Gauges and Console.
    CAUTION: Refer to BATTERY DISCONNECT CAUTION .
  2. Disconnect the negative battery cable.
  3. Disconnect the electrical connector (4) from theft deterrent module (3).
  4. Remove the screw (2) from the theft deterrent module bracket (1).
  5. Remove the theft deterrent module (3) with bracket (1) from the vehicle.
  6. Remove the theft deterrent module (3) from bracket (1), if necessary.
    Fig 1: Removing Theft Deterrent Control Module
    G01434223Courtesy of GENERAL MOTORS CORP.
About FixVault