FixVault
Home › Pontiac › 2003 › Vibe GT › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Child Restraint Tether Anchor Replacement › Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the child seat anchor bracket (4) to the vehicle. Secure the bracket with the bolt (3).

    Tighten 

    Tighten the child seat anchor bracket bolt to 2 N.m (15 lb ft).

  2. Install the rear access panel (2).
    Fig 1: Installing Child Seat Anchor Bracket, Bolt & Rear Access Panel
    G01435178Courtesy of GENERAL MOTORS CORP.
About FixVault