Removal Procedure

Roll the second row seats forward.

Fig 1: Aligning Second Row Seats Forward
Courtesy of GENERAL MOTORS CORP.
Fold the third row seat down.
Open the guide loop covers from the left rear seat belt.

Fig 2: Identifying Guide Loop Covers From LH Rear Seat Belt
Courtesy of GENERAL MOTORS CORP.
Remove the guide loop bolts from the second and from the third row seat belts.

Fig 3: Locating Guide Loop Bolt
Courtesy of GENERAL MOTORS CORP.
Remove the upper trim from the second and third row pillars.

Fig 4: View Of Upper Trim From Second & Third Row Pillars
Courtesy of GENERAL MOTORS CORP.
Remove the storage compartment. Refer to Storage Compartment Replacement - Rear (Rendezvous) in Interior Trim.
Remove the rear liftgate sill.

Fig 5: Identifying Rear Liftgate Sill
Courtesy of GENERAL MOTORS CORP.
Remove the cargo tie-down loops from the rear quarter trim.
Pull the top of the quarter trim loose to gain access to the bolts that secure the rear object alarm detection module.

Fig 6: View Of Rear Object Alarm Detection Module
Courtesy of GENERAL MOTORS CORP.
Remove the bolts.
Remove the electrical connector to the module.
Remove the rear object alarm detection module.