FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Body & Frame › Exterior Body Panels › Body Front End › Repair Instructions › Splash Shield Replacement - Engine › Removal Procedure

Removal Procedure

  1. Remove the push-in retainers holding the engine splash to the lower flange of the engine compartment side rail using J 38778  .
    Fig 1: View Of Engine Splash Shield Push-In Retainers
    GM622012Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine splash shield from the lower flange of the engine compartment side rail.
About FixVault