FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Trailer Hitch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Trailer Hitch Assembly
    GM879769Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the trailer hitch to the vehicle.
  2. Install bolts to frame rail.

    Tighten:  Tighten to 101 N.m (75 lb ft)

    3. Fig 2: View Of Rear Impact Bar
    GM621389Courtesy of GENERAL MOTORS CORP.
  3. Install the rear impact bar. Refer to Impact Bar Replacement - Rear Bumper in Bumpers.
    4. Fig 3: Locating Rear Energy Absorber
    GM621379Courtesy of GENERAL MOTORS CORP.
  4. Install the rear energy absorbers. Refer to Energy Absorber Replacement - Rear (Aztek) or Energy Absorber Replacement - Rear (Rendezvous) in Bumpers.
    5. Fig 4: Identifying Rear Fascia Retainers
    GM621472Courtesy of GENERAL MOTORS CORP.
  5. Install the rear fascia. Refer to Fascia Replacement - Rear Bumper (Aztek) or Fascia Replacement - Rear Bumper (Rendezvous) in Bumpers.
  6. Lower the vehicle.
About FixVault