FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Lumbar Replacement - Front Seat › Installation Procedure

Installation Procedure

    Fig 1: View Of Lumbar Support
    GM627469Courtesy of GENERAL MOTORS CORP.
  1. Install the lumbar support to the mounting holes in the front seat back.
  2. Install the lumbar support to the front seat back, pressing into place until fully seated.
    3. Fig 2: Identifying Lumbar Control Cable
    GM627458Courtesy of GENERAL MOTORS CORP.
  3. Install the lumbar support cable to the lumbar support control.
    4. Fig 3: View Of Lumbar Support Cable To Lumbar Support Control
    GM627457Courtesy of GENERAL MOTORS CORP.
  4. Install the lumbar support cable to the lumbar support control.
  5. Install the front seat back pad. Refer to Seat Back Pad Replacement - Front .
  6. Install the front seat back cover. Refer to Seat Back Cover Replacement - Front .
  7. Install the front seat. Refer to Seat Replacement - Bucket .
About FixVault