Installation Procedure
- Position the sunroof window panel into the sunroof module.
- Install the sunroof window panel screws to the sunroof module.
Tighten: Tighten the sunroof window panel screws to 4 N.m (35 lb in).
- Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment .
- Inspect the sunroof window panel for proper operation.
- Close the sunshade.
IMPORTANT:
Ensure that the information logo stencil on the sunroof window panel is at the rear of the opening.
NOTE:
Refer to Fastener Notice in Cautions and Notices.