FixVault

Removal Procedure

  1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Aztek)  or Trim Panel Replacement - Side Front Door (Rendezvous) .
  2. Remove the mirror face. Refer to Mirror Face Replacement .
  3. Remove the mirror motor screws.
    Fig 1: Locating Mirror Motor Screws
    GM826509Courtesy of GENERAL MOTORS CORP.
  4. Pull the mirror motor out from the mirror housing to gain access to the mirror motor electrical connectors.
    Fig 2: Expanded View Of Mirror Motor
    GM826512Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the mirror motor electrical connectors.
    Fig 3: View Of Mirror Motor Electrical Connectors
    GM826511Courtesy of GENERAL MOTORS CORP.
  6. Remove the mirror motor from the mirror housing.