FixVault

Removal Procedure

  1. Place the rear window in the full down position.
  2. Remove the trim panel. Refer to Trim Panel Replacement - Side Rear Door (Aztek)  or Trim Panel Replacement - Side Rear Door (Rendezvous) .
  3. Remove the water deflector. Refer to Water Deflector Replacement - Rear Door .
  4. Remove the outer belt sealing strip. Refer to Sealing Strip Replacement - Rear Door Window Belt Outer .
  5. Remove the screw from the rear window channel.
    Fig 1: Locating Window Channel Screw
    GM624483Courtesy of GENERAL MOTORS CORP.
  6. Remove the channel from the rear door.