FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Brakes › Antilock Brake System And Traction Control System › Repair Instructions › Wheel Speed Sensor Jumper Harness Replacement - Front › Removal Procedure

Removal Procedure

    Fig 1: Identifying Front Wheel Speed Sensor Jumper Harness To ABS Harness Connector
    GM155156Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the front wheel speed sensor jumper harness to ABS harness connector (8).
  2. Raise and support the vehicle on a suitable hoist. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the harness (4) from the splash shield retaining clip (5).
  4. Remove the harness (4) from the control arm retaining clips (3).
    5. Fig 2: View Of Wheel Speed Sensor, Connector And Harness
    GM188809Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the front wheel speed jumper harness connector (2) from the front wheel sensor.
  6. Remove the front wheel speed sensor jumper harness (1).
About FixVault