FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement - Front Floor (Aztek) › Installation Procedure

Installation Procedure

    Fig 1: Aligning Front Floor Console
    GM642418Courtesy of GENERAL MOTORS CORP.
  1. Align the front floor console to the floor.
  2. Connect the required electrical connectors.
    3. Fig 2: Locating Front Floor Console Nuts
    GM642415Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the nuts to the front of the front floor console.

    Tighten:  Tighten the nuts to 6 N.m (53 lb in).

    4. Fig 3: View Of Front Floor Console Nuts -Rear
    GM642417Courtesy of GENERAL MOTORS CORP.
  4. Install the nuts to the rear of the front floor console.

    Tighten:  Tighten the nuts to 6 N.m (53 lb in).

  5. Install the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek)  or Trim Plate Replacement - Front Floor Console (Rendezvous) .
About FixVault