FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement - Front Floor (Aztek) › Removal Procedure

Removal Procedure

  1. Remove the front floor console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek)  or Trim Plate Replacement - Front Floor Console (Rendezvous) .
  2. Disconnect the electrical connectors.
    3. Fig 1: Locating Front Floor Console Nuts
    GM642415Courtesy of GENERAL MOTORS CORP.
  3. Remove the nuts from the front of the front floor console.
    4. Fig 2: View Of Front Floor Console Nuts -Rear
    GM642417Courtesy of GENERAL MOTORS CORP.
  4. Remove the nuts from the back of the front floor console.
  5. Recline the seats to gain clearance.
    6. Fig 3: Aligning Front Floor Console
    GM642418Courtesy of GENERAL MOTORS CORP.
  6. Lift straight up on the front floor console and pull back in order to remove the console from the vehicle.
About FixVault