FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Head Up Display Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Head Up Display Module
    GM655942Courtesy of GENERAL MOTORS CORP.
  1. Install the heads up display module.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts that secure the heads up display module to the IP.

    Tighten:  Tighten the bolts to 2 N.m (18 lb in).

  3. Connect the electrical connectors.
  4. Install the IP upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek)  or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) .
About FixVault