FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Engine Mechanical › Engine Mechanical - 3.4L › Repair Instructions › On-Vehicle Repair Instructions › Engine Mount Bracket Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Engine Mount Upper Nuts
    GM96010Courtesy of GENERAL MOTORS CORP.
  1. Install the engine mount bracket to the engine mount.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the engine mount upper nuts.

    Tighten:  Tighten the engine mount upper nuts to 53 N.m (39 lb ft).

  3. Install the engine mount. Refer to Engine Mount Replacement .
About FixVault