Fuel Pulse Dampener: Installation
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install the new "O" ring on the fuel pulse dampener. Lubricate the fuel pulse dampener "O" ring with clean engine oil. Push the fuel pulse dampener into the fuel rail. See Fig 1. Install the new fuel pulse dampener retaining ring. Tighten the fuel filler cap.
- Connect the negative battery cable. Perform the following procedure in order to inspect for leaks. Turn the ignition on for 2 seconds. Turn the ignition off for 10 seconds. Turn the ignition on. Inspect for fuel leaks. Install the left fuel rail cover.
- Check if keyless entry transmitters function properly. If battery was disconnected, transmitter may not communicate or may loose synchronization with the receiver. If transmitters do not function properly, reprogram transmitters. See KEYLESS ENTRY TRANSMITTER SYNCHRONIZATION under PROGRAMMING.