FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 110 (Lighting Systems) › Repair Instructions › Clearance Lamp Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Clearance Lamp Lens
    GM803118Courtesy of GENERAL MOTORS CORP.
  1. Insert the bulb into the bulb socket and twist clockwise to install.
  2. Insert the forward edge of the lens into the opening and press the rear edge downward to install.
  3. Install the push-pin.
About FixVault