FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 110 (Lighting Systems) › Repair Instructions › Clearance Lamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Clearance Lamp Lens
    GM803118Courtesy of GENERAL MOTORS CORP.
  1. Turn OFF the headlamp switch.
  2. Remove the push-pin.
  3. Insert a small flat bladed tool under the rear edge of the lens and pry upward.
  4. Remove the lens by pulling rearward.
  5. Twist the bulb counterclockwise to remove.
About FixVault