Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Install the blower motor control processor (1).
- Install the blower motor control processor mounting screws (2).
Tighten: Tighten the screws to 1.9 N.m (17 lb in).
- Connect the electrical connector (3) to the blower motor control processor (1).
- Connect the electrical connector to the blower motor.
- Install the right closeout panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
NOTE:
Refer to Fastener Notice in Cautions and Notices.