FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 123 (Body Front End) › Repair Instructions › Hood Latch Release Cable Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Hood Latch Release Handle/Cable
    GM740669Courtesy of GENERAL MOTORS CORP.
  1. Attach the mechanic's wire to the exterior end of the cable.
  2. Using the mechanic's wire as an aid, guide the cable underneath the sound insulation and pass the exterior portion of the cable through the cowl panel.
  3. Install the cable to the release handle (3).
  4. Seat the cable grommet (1) to the cowl panel.
  5. Install the release handle (3) to the left side kick panel.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the nut (2) that retains the release handle (3) to the left side kick panel.

    Tighten:  Tighten the nut to 7 N.m (62 lb in).

    7. Fig 2: Connecting Hood Latch Cable From Latch
    GM742161Courtesy of GENERAL MOTORS CORP.
  7. Route the cable as previously noted, between the headlamp housing panel and the core support.
  8. Attach the cable to the retainers on the inner fender.
  9. Install the cable to the hood latch assembly.
  10. Install the hood latch. Refer to Hood Latch Replacement  .
  11. Install the grille. Refer to Grille Replacement (Envoy, Envoy XUV) , Grille Replacement (TrailBlazer) , Grille Replacement (Bravada) or Grille Replacement (Rainier) in Exterior Trim.
  12. Install the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  13. Install the left front door sill plate. Refer to Door Sill Plate Replacement - Front in Interior Trim.
About FixVault