FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 126 (Body Rear End) › Repair Instructions › Switch Replacement - Midgate Latch › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Midgate Latch Switch
    GM986361Courtesy of GENERAL MOTORS CORP.
  1. Remove the midgate inner panel. Refer to Midgate Panel Replacement - Inner .
  2. Disconnect the electrical connector (1) from the midgate latch release switch.
  3. Depress the retaining tabs (2) on the latch release switch to release the switch from the inner trim panel.
  4. Remove the latch release switch from the midgate inner panel.
About FixVault