Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Torque Rod - Endgate

Courtesy of GENERAL MOTORS CORP.

Install the torque rod to the endgate and hinge assembly.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the bolts retaining the torque rod to the endgate.
Tighten: Tighten the torque rod bolts to 25 N.m (18 lb ft).
Close the endgate.