Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Ensure that the liftgate is closed before starting the removal procedure on the liftgate window.

Remove the liftgate upper molding. Refer to Molding Replacement - Liftgate Upper in Exterior Trim.

Fig 1: Identifying Liftgate Window & Related Components

Courtesy of GENERAL MOTORS CORP.

Open the liftgate window (1).

CAUTION: Refer to Glass and Sheet Metal Handling Caution in Cautions and Notices.

Fig 2: View Of Liftgate Window Handle Bolts And Defogger Grid Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Remove the liftgate window handle bolts (3).
Remove the outside handle (4) and striker from the liftgate window.
Remove the liftgate window defogger electrical connectors (2) from the right and left sides.

CAUTION: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

With the aid of an assistant remove the struts (3) from the liftgate window. Refer to Strut Replacement - Liftgate .
Lower the liftgate window (1).

IMPORTANT: Do not open liftgate once the hinge pins have been removed from the liftgate window.

Fig 3: Removing Liftgate Window Hinge Pins & C-Clips

Courtesy of GENERAL MOTORS CORP.

With the liftgate closed, remove the hinge pin C-clips (2) and (3) from the liftgate window hinges.
Remove the hinge pins (1).
Remove the liftgate window from the vehicle with the aid of an assistant.

Fig 4: Removing Liftgate Window
Courtesy of GENERAL MOTORS CORP.