FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 137 (Sunroof System) › Repair Instructions › Moveable Roof Panel Motor/Actuator Replacement › Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Moveable Roof Panel Actuator-To-Moveable Roof Panel Assembly Bolts
    GM1222241Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector (1) to the moveable roof panel actuator.
  2. Install the actuator to the moveable roof panel assembly.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts (2) retaining the actuator to the moveable roof panel assembly.

    Tighten:  Tighten the actuator bolts to 5 N.m (44 lb in).

  4. Install the moveable roof panel actuator cover. Refer to Moveable Roof Panel Actuator Cover Replacement .
  5. Install the moveable roof panel. Refer to Moveable Roof Panel Assembly Replacement .
About FixVault