Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Connect the stabilizer shaft link to the stabilizer shaft and to the frame.

Fig 1: View Of Stabilizer Shaft Links & Stabilizer Shaft
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the stabilizer shaft link retaining nuts.
Tighten: Tighten the stabilizer shaft nuts to 100 N.m (74 lb ft).
Lower the vehicle.