FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › External Pages › Different car › Section 188 (Lighting Systems) › Repair Instructions › Headlamp Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) in Instrument Panel, Gages and Console.
  2. Remove the screws from the headlamp switch housing.
  3. Remove the headlamp switch housing from the instrument panel.
  4. Disconnect the electrical connector from the headlamp switch.
  5. Disconnect the electrical connector from the foglamp switch.
  6. Remove the foglamp switch from the headlamp switch housing, using a small flat bladed tool.
    7. Fig 1: Headlamp
    GM575129Courtesy of GENERAL MOTORS CORP.
About FixVault