Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the air cleaner intake duct clamps (2,6).
- Remove the PCV tube (4) from the air cleaner intake duct.
- Disconnect the intake air temperature (IAT) sensor electrical connector (3).
- Disconnect the mass air flow (MAF) sensor electrical connector (5).
- Remove the air cleaner intake duct from the air cleaner assembly (8) and the throttle body.
- Loosen the clamp on the MAF sensor and remove the air cleaner intake duct from the MAF sensor (7).
- If replacing the air cleaner intake duct, remove the IAT sensor (1) with a twisting and pulling motion.